Muir AA710 Hand Held WIRELESS Roving Controller and Chain/Rode Counter with Digtal LCD Display and Base Station AA710 (F801024)

Muir AA710 Hand Held WIRELESS Roving Controller and Chain/Rode Counter with Digtal LCD Display and Base Station AA710 (F801024)
Muir AA710 Hand Held WIRELESS Roving Controller and Chain/Rode Counter with Digtal LCD Display and Base Station AA710 (F801024) - Image 2

$1,699.00

Muir AA710 Wireless Roving Controller and Chain Counter - LCD Screen - IP67 - Suits 12V, 24V, AC and Hydraulic Systems
  Our Website DOES NOT ACCEPT PAYMENTS. Please complete your enquiry and checkout. We will send you a quote with AVAILABILITY, PRICE & FREIGHT (if required)
or Call Now 0755 292 544

Muir AA710 Hand Held Wireless Roving Controller and Chain/Rode Counter AA710 (F801024)

with Digtal LCD Display and Base Station

Incl. Wireless Remote Control and Wireless Base Station

The AA710 provides complete flexibility in control from the bow or the helm station. See at a glance the length of anchor rode deployed. Fits any windlass.

Features :

  • Larger LCD with improved contrast
  • 2 additional outputs in the base station allow for more installation options – A single kit can be used for 1 windlass plus a bow and stern thruster
  • Antenna plug is standard on the base station
  • Automatic sensor detection – no need to select sensor in the set up
  • Manual control alarm and stop at docking distance – stops the windlass during retrieval when using manual and automatic operations
  • Swap controls option in set up – this option means the ‘Up’ button can be used as ‘Out’ and the ‘Down’ button can be used as ‘In’
  • Drum windlass counting capability
  • Improved troubleshooting – Simplified diagnostics and built in voltmeter with expanded technician diagnostics
  • Time out connection between the base station and the console now adjustable up to 20 minutes
  • Dual speed windlass capability
  • Options for windlass related actions, using the left and right arrow buttons, no longer limited to anchorwash and anchorlight. Can now be user selected and could include a windlass stow, power cleats, deck wash, deck light
  • Power enable option now available with off delay for hydraulic, AC, DC and PLC installations

Plus:

  • Full windlass control and chain counting
  • Controls bow and stern thrusters independently and together
  • Preset the length of rode to deploy
  • Auto stop and docking alarm when the anchor is close to docking
  • Counts rope/chain or all-chain rode
  • Logs windlass operating hours for maintenance
  • Easy installation and set up
  • Plug and play sensor installation
  • Console unit is shockproof, waterproof and will float
  • High level wireless transmission security includes unique ID and registration for every unit
  • Safety lock reduces unwanted operation
  • Ergonomic shape with lanyard connector
  • Console holder and protective cover
  • Displays signal strength and battery level
  • Use with DC, AC and hydraulic windlasses
  • Antenna available if wireless communication is impeded
  • Operates in parallel with other control equipment eg toggle switches, foot switches and other electronic controllers

Function Options:

A system with one base station (6 outputs) can operate:

  • 1 windlass plus a deck wash and deck light or other auxiliary functions
  • or 1 windlass and 1 or 2 thrusters
Kit Includes:
  • 1 wireless hand held remote control
  • 1 base station
  • 1 sensor
  • 1 magnet

Downloads:

Sensor and Magnet Installation

Options:

  • F801025 - AA710 Antenna Only (recommended for use on Composite or Metal Boats). Also used to increase range beyond 10m.
  • F801027 - AA710 Hand Held Remote Control Handset Only
  • F801026 - AA710 Base Station Only
  • AA5905 – 2m Cable Extension from sensor to base station

Optional AA710 Antenna (F801026)

Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses, plus other ancillary equipment.

 

AA710 Remote Console

AA710 Base Station

Power Supply

2 x AA1.5V Batteries

12/24V DC

Current Consumption

M/A

50mA

Output Current Draw

N/A

12V DC: 3.5A min/10mA max

24V DC: 3.5A min/20mA max

IP Rating

IP67

IP67

Operating Temperature Range

23°F to 140°F (-5°C to 60°C)

Wireless Transmission

2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID

Wireless Range

Typical Minimum 10m (30ft). Range depends on installation

Important Note: Maxwell HRC6 and HRC8 model anchor winches require a separate sensor to be fitted to the anchor winch (P102909 Triangle Sensor - NOT INCLUDED IN THIS KIT). This sensor is a FREE exchange at the time of order only for your new winch and must be purchased and installed separately when retro fitting the AA560 controller.

RF Compliance – EN 300 440/328 FCC-CFR-47 Part 15
EMC Compliance CE – EN60945
Communication Security
  • 2.4GHz ISM Band
  • IEEE 802.15.4 compliant
  • Can co-exist with Bluetooth and WiFi networks nearby
  • The network operates on different channels to the 2.4Ghz WiFi netowrks and offers a high level of security:
    • Each item has a Unique ID
    • Each transmission contains sender and destination information. This ensure that remotes and base station can only send and receive transmissions to and from registered members of their system
    • Use of ‘hand shaking’ provides added security. Control functions are not executed until a secure link between remote and base station has been achieved
    • Loss of continual incoming signals from the remotes places the base station into safety mode where all control functions are shut down
  • Frequency Hopping Spread Spectrum (FHSS) provides further security and immunity:
    • Spread Spectrum signals are highly resistant to noise and interference
    • The AutoAnchor wireless system scans frequencies within the band before transmisison. This ensures that communication is not attempted on a frequency where there is a lot of existing noise and possible interference
  • Signal strength is displayed on the remote
  • Operation range up to 10m (30ft) from base station

Remote Environmental Protection

  • Water resistance designed to meet IP67. Remote enclosure has a rubber seal around the perimeter of the case
  • Shock protection. Remote enclosure with rubber over-moulding to provide protection against shock
  • The rubber over-moulding also provides grip in wet conditions, and a non-slip quality in rough sailing conditions

Wireless Remote Battery Details

  • Remote powered by two AA alkaline batteries
  • The remote displays battery capacity conditions on the screen
  • The remote has many functions that help to minimise battery consumption. Examples of these include:
    • A light sensor ensures the display is backlight only when required
    • Remote is automatically turned off when not in use
    • Remote enters low power mode when turned off

Other

  • DC, AC, and Hydraulic systems can be controlled using the interconnection of solenoids or relays
  • Can operate in parallel with other control equipment eg toggle switches, foot switches, other electronic controllers.
  • Control output hardware is reverse voltage protected, under-voltage and over-voltage protected, and current limited. All backfeeding protected.
  • Compatible with all AutoAnchor sensors
Weight 1.0 kg
Dimensions 33.0 × 23.0 × 7.0 cm

Related products