BEP Marinco DC Systems Monitor (Panel Mount) - Suits 8-32V - Incl Shunt - 113408 (SUR 80-600-0027-00)
2.8” Colour LCD Display / Battery Input Voltage 12-24VDC / Charge/Discharge Amps for up to two banks
Capacity remaining in A/h and % / Battery Condition
Fresh, Grey Or Black Tank fluid level / Circuit status
The Contour Digital Monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. Monitors voltage on up to 3 battery banks, Amps for charge and discharge and capacity remaining in amp hours /percentage utilising peukerts exponent (house bank only) with the added function of a bilge monitor allowing 24 hour monitoring of your bilge pump. This meter is an important addition to modern battery management systems. Selectable legends allow full information to be shown on the screen to avoid confusion, unlike other digital meters available, which only show confusing digits. LCD screen draws 70 percent less than equivalent LED screens.
Comes supplied with shunt, part No. LB-450-50. Installation kits are available in 5m and 10m lengths. part No. 600-DCM-5M and 600-DCM-10M
Display Type - Configure the DCSM to show the data in analogue, digital and graphic form.
Circuit Status - View the status of important circuits (on/off) In graphic and numeric form
DC Power Meter:
- Displays voltages of multiple battery banks (0-32VDC).
- Displays charge and discharge (amps) of 1 x battery bank (*or 2 battery banks if extra shunt and cable are added).
- Displays battery capacity in amp hours.
- High/Low level alarms
Tank Level - View tank level information for multiple tanks in numeric and graphic forms. Resettable when leaving the boat.
Specifications:
- 2.8" Colour QVGA LCD
- Input voltage 8-32VDC
- Dimensions:
- Overall: Width 127mm x Height 115.5mm
- Cut Out: Width 107mm x Height 95mm
- Intrusion: 20mm
- Backlit keypad
Monitors:
- Charge/discharge amps for two* banks (*needs extra shunt - see below)
- Capacity remaining in A/h and %
- Battery condition
- Tank fluid level
- Circuit status
Includes:
DCSM Comes with Shunt to suit 1 x battery bank:
- 1 x 450 Amp x 50mV Shunt (113457)
Options:
NB: *To add more battery banks one of each of the parts below are required for each battery bank (i.e. 1 x 113403 and 1 x 113457)
- 1 x 450 Amp x 50mV Shunt (113457)
- Installation Cable Kit (113403)
- BEP Systems Monitor (Surface Mount) - Inc Shunt (80-600-0021-00 - 113386)
- BEP Systems Monitor (Surface Mount) - Metre Only (80-600-0022-00 - 113385)
- BEP Systems Monitor (Panel Mount) - Inc Shunt (80-600-0027-00)
NB: To add tanks to monitor, add one programmable sender unit - TS1 Ultrasonic Tank Sender #113361 for each tank.
Downloads:
