On-Board Battery Charging System for 2nd 12V Battery – Suits Minn Kota or MotorGuide Electric Trolling Motors (SUR CH4.5)

On-Board Battery Charging System for 2nd 12V Battery - Suits Minn Kota or MotorGuide Electric Trolling Motors (SUR CH4.5)

$444.00

Charges Your Second 12V Battery from the Engine or 240V Battery Charger Automatically - Auto Isolates Batteries for Safety
  Our Website DOES NOT ACCEPT PAYMENTS. Please complete your enquiry and checkout. We will send you a quote with AVAILABILITY, PRICE & FREIGHT (if required)
or Call Now 0755 292 544

Minn Kota or Motorguide Xi5 electric trolling motor Battery Charging Harness with 50Amp Thermal Breaker and VSR

Charges your Minn Kota or Motorguide electric trolling motor battery while the boat's engine is running between fishing spots, creating longer run times and extending the overall life of your battery

Suits (12V DC to 12V DC) or (24V DC to 24V DC) Systems

When the current from your boat’s alternator has charged the main engine battery to a voltage of 13.7 Volts, the Voltage Sensitive Relay cuts in the  trolling motor battery then draw power from your main engine to efficiently charge your batteries on runs between fishing spots, this keeps you on the water longer and decreases on-shore charge times, it also extends your Minn Kota/ Motorguide electric trolling motor battery life by protecting your battery from frequent deep discharges

This Perfect, ready to go wiring harness charges your Minn Kota/Motorguide Battery bank from your boat's alternator. Wires directly from your starting battery to the front Minn Kota Battery with a VSR & Circuit breaker in line.
Just bolt on to your existing battery lugs and your charging worries are over. Perfect for "on-water" charging when you don't have a 240 Volt outlet to plug in to.
Suits any 12 Volt starting battery to 12 Volt second battery bank arrangement or 24 Volt starting battery to 24V second battery bank arrangement.

Your batteries will last longer as well by not being run down to the state of getting the plates sulfated which is the culprit of ruining a good battery.

They are only intended to keep you running stronger longer. They are not intended to fully charge your battery. You need a good on board charger as well to keep your batteries maintained properly.

Includes:

  • 4.5m wiring loom with protective conduit
  • 12 volt 140Amp VSR (Voltage Sensitive Relay)
  • 50Amp Thermal Breaker
  • Battery lugs (fitted)

Other Charging and Wiring Harness Options:

VSR Info (Voltage Sensitive Relay):

BEP 710-140A - VSR 12 Volt and 24 Volt Digital Voltage Sensing Relay 125 Amp

The DVSR (Digital Voltage Sensing Relay) allows charging of two independent battery banks from a single charging source. When the voltage on the start battery rises to a charged level, the DVSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the DVSR will disengage, isolating the two batteries from each other.The Dual sensing functionality enables the sensing of two battery banks, allowing two way charging

Digital enhancements:

  • 80% lower stand-by current draw during normal operation when powered but disengaged
  • Zero stand-by current draw when remote sensing circuit utilized
  • Multi voltage - auto selects between 12Volt and 24Volt DC operation
  • Remote status LED output. Provides DVSR status indication at remote location
  • Remote sensing circuitry provides isolated control from secondary supply, and enhanced protection from voltage spikes when connected to ignition switch
  • Increased accuracy of voltage measurement through digital circuitry
  • Lowered cut in voltage from 13.7Volts  to 13.4Volts - 26.8Volts for 24Volt
Weight 0.25 kg

Related products