Vetus Plastic Waterlock LP50S Super - Fixed 50mm Inlet - 10.5L Capacity
Includes Drain Plug - Suits Long Exhaust Hose (4m+) (WLOCKL50S)
For exhaust hose with internal diameters of 51 mm, 60 mm, 76 mm or 90 mm. The smaller model L50R, shown above, is to be used when the exhaust line is relatively short, whereas the larger model LP50S should be used with a long length of exhaust hose. These waterlocks are provided with a drain plug.
The Vetus exhaust system components are especially suitable for use in water-injected exhaust systems. The maximum continuous operating temperature of the plastic components of the exhaust systems is 70 degrees C (158‑degrees F).
To calculate the required waterlock capacity, use the following formula.
Where:
- D = Internal diameter of the hose (mm)
- L = Length of hose (mm)
Options:
- LP30 - Vetus Plastic Waterlock LP30 - Fixed 30mm Inlet - 2.3L Capacity
- LR40 - Vetus Plastic Waterlock LR40 - Rotating 40mm Inlet - 4.3L Capacity
- LR45 - Vetus Plastic Waterlock LR60 - Rotating 45mm Inlet - 4.3L Capacity
- LR50 - Vetus Plastic Waterlock LR60 - Rotating 50mm Inlet - 4.3L Capacity
- LP50S - Vetus Plastic Waterlock LS50S - Fixed 50mm Inlet - 10.5L Capacity
- LP60 - Vetus Plastic Waterlock LP60 - Fixed 60mm Inlet - 10.5L Capacity
- LP75 - Vetus Plastic Waterlock LP75 - Fixed 75mm Inlet - 10.5L Capacity
- LP90 - Vetus Plastic Waterlock LP90 - Fixed 90mm Inlet - 10.5L Capacity
Downloads:
