Vetus Plastic Waterlock LR50 - Rotating 50mm Inlet - 4.3L Capacity - Includes Drain Plug (WLOCKL50R)
For exhaust hose with internal diameters of 40 mm, 45 mm or 51 mm. Provided with a plug for draining during winter time. The inlet connection of these 3 models will revolve through 360°, which greatly facilitates the installation of the exhaust assembly. There is a larger waterlock for Ø 51 mm hose which is recommended for assemblies with longer length exhaust hose (more than 4 metres total hose length).
The Vetus exhaust system components are especially suitable for use in water-injected exhaust systems. The maximum continuous operating temperature of the plastic components of the exhaust systems is 70 degrees C (158‑degrees F).
To calculate the required waterlock capacity, use the following formula.
Where:
- D = Internal diameter of the hose (mm)
- L = Length of hose (mm)
Options:
- LP30 - Vetus Plastic Waterlock LP30 - Fixed 30mm Inlet - 2.3L Capacity
- LR40 - Vetus Plastic Waterlock LR40 - Rotating 40mm Inlet - 4.3L Capacity
- LR45 - Vetus Plastic Waterlock LR60 - Rotating 45mm Inlet - 4.3L Capacity
- LR50 - Vetus Plastic Waterlock LR60 - Rotating 50mm Inlet - 4.3L Capacity
- LP50S - Vetus Plastic Waterlock LS50S - Fixed 50mm Inlet - 10.5L Capacity
- LP60 - Vetus Plastic Waterlock LP60 - Fixed 60mm Inlet - 10.5L Capacity
- LP75 - Vetus Plastic Waterlock LP75 - Fixed 75mm Inlet - 10.5L Capacity
- LP90 - Vetus Plastic Waterlock LP90 - Fixed 90mm Inlet - 10.5L Capacity
Downloads:
