Fullriver DC120 – 12 Volt – 120Ah – 760CCA (DC120-12B)
Marine Deep Cycle AGM Minn Kota- Motor Guide Electric Trolling Motor Battery – Maintenance Free Sealed AGM
Which is the best trolling motor battery?
Case Size 331 L x 175 W x 218 H (mm)
When it comes to Deep Cycle batteries, the details matter. Construction, plate chemistry, and craftsmanship all have to be in sync to get the longest life in the most demanding applications. Because of the environments where Fullriver DC AGM batteries are used, we work closely with our customers to ensure our construction standards are geared to meet your needs. We use more lead in creating stronger connections between cells, heavier plates to increase our reserve capacity, and have formulated our batteries to maximize life cycles.
By taking these steps, the engineers and factory for Fullriver DC Series batteries have matched the highest standard for Deep Cycle VRLA batteries on the market. This has allowed us to craft out batteries to ensure they maintain their performance levels in the highest vibration and deepest discharge applications.
Whether you need deep cycling power for your Boat or RV; for your Solar and Wind power generator system; a consistent ride from your Electric Vehicles or Golf Cars; or a long lasting battery pack in your Floor Cleaning machine, Aerial Work Platforms or Pallet Truck, we have a battery that has been tested and proven the best in your Deep Cycle application.
And because it comes in a fully sealed, maintenance-free, corrosion-free package, Fullriver DC Series AGM batteries are an investment in making sure your battery pack enhances the quality of your machines. Fullriver DC Series AGM – The Battery that Makes Your Machine Better
| Cycling Capacity | |
|---|---|
| 20 hour rate | 105 Amp Hours |
| Reserve Capacity | |||
|---|---|---|---|
| @ 25 Amps | 175 minutes | @ 75 Amps | 43 minutes |
| Mechanical Specifications | |
|---|---|
| Group Size | 27 |
| Terminal Type | M8 (w/ TP08 Brass AP Included) |
| Total Height | 8.46″ (215 mm) |
| Height | 8.31″ (211 mm) |
| Width | 6.65″ (169 mm) |
| Length | 12.09″ (307 mm) |
| Weight | 67.0 lbs (30.4 kg) |
| Case Type | ABS Plastic – Flame Res Rating UL94-HB |
| Discharge Table (Constant Current) | ||
|---|---|---|
| Time | Amps | Rate |
| 20 hr | 5.3 | 0.05 CA |
| 10 hr | 9.5 | 0.1 CA |
| 8 hr | 11.4 | 0.13 CA |
| 5 hr | 17.2 | 0.25 CA |
| 3 hr | 23.7 | 0.33 CA |
| 2 hr | 31.6 | 0.5 CA |
| 1 hr | 59.6 | 1 CA |
| Electrical Specifications | |
|---|---|
| Nominal Voltage | 12 Volt |
| Capacity @ 100 hour rate | 115 AH |
| Capacity @ 20 hour rate | 105 AH |
| Capacity @ 10 hour rate | 95 AH |
| Capacity @ 5 hour rate | 86 AH |
| CCA | 680 |
| CA or MCA | 820 |
| Short Circuit Current | 2590 Amps |
| Internal Resistance | 4m Ω |
| Charge Voltages | ||||
|---|---|---|---|---|
| Battery Voltages | ||||
| Charge Stage | 12V | 24V | 36V | 48V |
| Bulk | 14.7 V | 29.4 V | 44.1 V | 58.8 V |
| Absorption | 14.7 V | 29.4 V | 44.1 V | 58.8 V |
| Float | 13.6 V | 27.2 V | 40.8 V | 54.6 V |
| TC Factor: -4mV/°C/cell | ||||
| Temperature Range Specifications | ||
|---|---|---|
| Condition | Recommended | Maximum |
| Storage | -15°C to 50°C | -40°C to 71°C |
| Operation | -15°C to 40°C | -40°C to 71°C |
| Charge with TC | -15°C to 50°C | -40°C to 71°C |
| Charge without TC | 0°C to 40°C | -15°C to 50°C |
| Terminal Torque Specifications | |||
|---|---|---|---|
| Terminal Type | ft-lbs | in-lbs | Nm |
| AP | DT (AP) | DT (stud) | M6 | M6M (stud) | TP07 (AP) | TP08 (AP) | 4.2 – 6.0 | 50-70 | 5.6 – 7.9 |
| FR45 | 6.0 – 7.5 | 70-90 | 7.9 – 10.1 |
| M8 | LT | 7.1 – 8.0 | 85-95 | 9.6 – 10.7 |
| M10M (stud) | 9.2 – 10.4 | 110-125 | 12.2 – 14.0 |
