OceanLED X8 Surface Mount Underwater & Above Water Light
2300 Lumens max - Midnight Blue (125333)
We ship Australia wide – ask us for a quote!
The OceanLED X-Series X8 combines brightness with affordability. Whether cruising or fishing, the X8 gives stunning performance, allowing you to enjoy more time on the water with family and friends. The X8 outputs an impressive 2,300 fixture lumens from its low profile design and utilizes focused optics to produce a 60 ̊ circular beam from each LED, providing great water penetration and illuminating a large area.
Choose a single colour version from Midnight Blue or Ultra White or pick our Colours option where which you can select any colour you want from the RGBW (Red, Green, Blue, White) spectrum.
You can toggle between colours using a standard DC switch, or with our OceanDMX controller and free smartphone app, your choice is virtually limitless.
Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait and help catch more fish.
- Great choice of colour options to suit your needs.
- 2,900 LUMENS / 2,300 FIXTURE LUMENS - Outstanding performance from this small, bright light makes it the obvious choice for those who want to stand out from the crowd.
- Slim design makes it simple to install on virtually every boat.
- True 60 ̊ beam angle with no fading at the edge giving better illumination
- ABOVE WATER MOUNTING - The X Series can also be used as an exterior light for your cockpit, deck or trailer.
- COMPACT AND SIMPLE DESIGN - Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light.
- SIMPLE TO INSTALL - Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 4 screws to hold in place. No bonding required.
- EASY TO CLEAN - Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use your boat.
- FISH-STROBE MODE - Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait.
- ACTIVE THERMAL CONTROL - ATC prevents overheating. In the event of overheating the ATC system will reduce the LED power level in order to protect the LEDs, or in extreme cases, turn off the fixture completely.
- COLOURS CONTROL - Colours models are compatible with OceanDMX for full control, interactivity and colour customisation. Alternatively, cycle smoothly between red, green, blue and white with a standard DC switch.
Includes:
LED light and cable, inline fuse, mounting screws and installation guide.
Mounting Location Considerations - UNDERWATER Installation
- X-Series, Xtreme Pro and Xtreme Trailer Series lights are suitable for GRP and wooden hulls, as well as carbon fibre, aluminum/steel hulls using suitable mounting hardware.(If using stainless steel bezel ensure precautions for prevention of galvanic corrosion are employed
- If positioning lights on a transom, more small lights look better than few bigger lights. E.g. 4x XP8’s look better than 2x XP16’s
- When lights are pointing downwards, the light can reflect off a sandy sea bed giving a mirrored effect, and light will bounce back creating even more illumination.
- Ideal mounting depth is 10 – 20 cm / 4 - 8".
- Ideally mount your Xtreme Series lights at similar depth levels when using underwater to ensure matching color consistency through the water. Deeper lights will look duller and possibly differ in color to shallower mounted units.
- If positioning lights on a transom, take into consideration swim platforms and obstacles that may block the initial portion of the light, it may be necessary to use the next model size up.
Typical Wiring Diagram
Accessories:
- 125360 - Junction Box 4Way (for wiring up to 4 lights)
- 125362 - Bezel S/S to suit XT4
Downloads:
Options:
XT4 - 970 Lumens
XT16 - 3900 Lumens
