Isotherm CR42 Inox Stainless Steel Fridge/Freezer – 12 or 24 Volts DC – 42 Litre – Left or Right Hand Door Hinge – 1042BA1MK (C042RNEIT11111AA)

Isotherm CR42 Inox Stainless Steel Fridge/Freezer - 12 or 24 Volts DC - 42 Litre - Left or Right Hand Door Hinge - 1042BA1MK (C042RNEIT11111AA)
Isotherm CR42 Inox Stainless Steel Fridge/Freezer - 12 or 24 Volts DC - 42 Litre - Left or Right Hand Door Hinge - 1042BA1MK (C042RNEIT11111AA) - Image 2

$2,420.00

Isotherm Stainless Steel (INOX) 42 Litre Fridge with 4L Freezer - Relocatable Compressor Unit - Left or Right Hand Door Hinge - Incl Mounting Frame
  Our Website DOES NOT ACCEPT PAYMENTS. Please complete your enquiry and checkout. We will send you a quote with AVAILABILITY, PRICE & FREIGHT (if required)
or Call Now 0755 292 544

Isotherm Cruise Inox 42L Stainless Steel Marine Fridge with Freezer (1042BA1MK) (C042RNEIT11111AA)

 12 or 24 Volt - 42L Fridge with 4L Freezer- Left or Right Hand Door Hinge

With 3-Side Stainless Steel Mounting Frame

Suitable for Boats - Caravans - Motorhomes and RV's

We ship Australia wide - Ask us for a quote!

Small CRUISE refrigerators: CRUISE 42 Stainless Steel - The CR 42 INOX is the exclusive, stainless steel design version of the CR 42. The INOX version also provides the possibility of removing the compressor unit at the back and mount it in any vertical position up to 1.5 meter away.

Features:

  • Food preparation compliant stainless steel case
  • Flush mounted - no protrusion into galley area
  • Positive, flush closing mechanism
  • Hermetic fan cooled compressor
  • Contoured single piece plastic liner
  • Adjustable shelves
  • Internal light
  • Low voltage cut off
  • Radio interference suppression
  • Internal rotary thermostat
  • Utilises R134A ozone friendly refrigeration gas

Reversible Door Hinge:
The doors on the refrigerators are as standard - mounted with the hinges to the right hand side. The door can be hinged to the left by means of changing position of the upper and lower hinge fittings. The door lock must also be moved to the other side. CR 42 & 49 have the lower hinge assembly mounted in a plastic fitting, only these parts and the hinge pin must be moved to the other side. The upper hinge pin is threaded into the top part above the door, unscrew the top part to take off the door and move the pin to the other side. The CR INOX range up to the CR 85 model can also be re-hinged as described above - although most Inox fridges have a central handle. (Note: the CR 130 130 litre model has left or right doors with side mounted door locks and cannot be changed).

Isotherm Cruise 42L Stainless Steel Product Info:

  • Volume: 42 liters
  • Silent, high efficient, fan cooled 12/24V Danfoss / Secop compressor (type DB35F)
  • Mounting frames for a complete flush integration
  • Exclusive, complete stainless steel design (doors and handles)
  • 4 liter freezer compartment

Download:

Ventilation:

It is very important that the compressor/condenser unit is well ventilated and that cold air can enter at the bottom, pass behind the fridge and warm air can leave at the top in the area where it is mounted. The natural flow of air from below and upwards behind the fridge can be increased by arranging  ventilation openings at the rear. Make sure there is a free area of 15 - 23 sq.in. below and behind the refrigerator to allow ventilation air to pass behind from below. (see diagram below).

Electrical Connections:

When connecting the refrigerator electrically, it is important that following points are considered:

  • Always use cables of sufficient area. The area in the following table should be regarded as a minimum.
  • * Always connect the refrigerator directly to the battery or to the battery main switch on the plus circuit. Do not connect it via the boats own control panel or other diversions as this can cause a voltage drop in the power supply. Use the included fuse holder with a 15A fuse. Use 7.5A fuse in a 24 volt system. The fuse shall be mounted on the plus cable.
  • *Connect the red cable to the positive (+) terminal and the black to the negative (-) terminal. Use tab type terminals for the connection to the electronic unit and other cable connectors of sufficient size for the cable size selected.
  • * Do not connect the refrigerator direct to a battery charger. The battery charger must be connected to the battery.

Wire Dimensions:

The correct wire gauge  and type must be used.

Weight 17.0 kg
Dimensions 57.0 × 52.0 × 63.0 cm

Related products