Victron SmartSolar MPPT 100/30 Solar Charge Controller – Solar Panel Regulator with Bluetooth Control Built-In – Suits 12 or 24V Systems (SCC110030210)

SmartSolar MPPT 100/30 Solar Charge Controller - Solar Panel Regulator with Bluetooth Control Built-In (SCC110030210)

Suits 12 or 24V Systems (Auto Selects)

Max Charge Current 20A | Nom PV Input 440W@12V or 880W@24V | Max PV Open Circuit Voltage 100V

Ideal for use in Marine-Boats, Caravans, Motor homes and RV’s

Bluetooth Smart built-in – The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

VE.Direct – For a wired data connection to a Color Control GX, other GX products, PC or other devices

Ultrafast Maximum Power Point Tracking (MPPT) – Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions – If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency – No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).

Flexible charge algorithm – Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection – Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Internal temperature sensor – Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth – A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function – Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.