Victron ORION-Tr SMART DC-DC Charger 24/12-30 - Non-Isolated - Built-in Bluetooth (ORI241236140)
Charges Lead Acid, AGM and Lithium Batteries
Bluetooth Smart enabled – Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output
- Smart alternator compatibility: engine running detection mechanism
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off - A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current – An unlimited number of units can be connected in parallel.
High temperature protected – The output current will reduce at high ambient temperature.
IP43 protection – When installed with the screw terminals oriented downwards.
Screw terminals – No special tools needed for installation.
Input fuse (not replaceable)
