Johnson F4B-11 Impeller Pump - Ultra Ballast - 24V - 52LPM - 10-24690-02 (132178)
Heavy Duty - Self Priming - Bronze Body - 1/2" BSP, 1" Hose
Reversible Continuous Duty Pump for Fresh or Seawater
Designed to quickly fill or, when reversed, drain a ballast tank at a rate of more than 45 l/min (12 GPM). Capable of pumping fresh or sea water the pump’s robust design can handle the rigors of continuous duty usage, is reversible and has a built in thermal overload for added protection. Polarity reversing switch kit available as accessory. Care not to run dry for extended periods of time will increase the pump longevity and ensure reliable performance for many years.
Note! Only for water handling.
Features:
- Body: Bronze
- Impeller: 09-824P-1
- Seal: Lip seal
- Connection: Hose 1" / ½" BSP
- Length: 202mm
- Width: 120mm
- Height: 90mm
- Weight: 3kg
Self-priming
Pump is self-priming up to 4 m. Intake lines must be air-tight to ensure self-priming. Note: Pump will prime when impeller is dry but suction lift up to 4 m is only obtainable when impeller is lubricated with liquid being pumped or Johnson Impeller Lubricant. For permanent installations where suction lift exceeds 4 m, a foot valve should be used to assure priming on start up. ALWAYS USE JOHNSON IMPELLER LUBRICANT (glycerin) for impeller lubrication. Never use grease or mineral oils.
Continuous duty
For continuous duty 0,6 bar (60 kPa, 8,5 psi) maximum head is permissible. Max ambient temp is +60°C.
Option:
- 139064 - Polarity Reversing Switch Kit for Ultra Ballast Pump F4B-11
