Zipwake KB300-S Series CHINE KIT - Dynamic Trim Control System - 2011732 (0580120)
Incl CONTROL PANEL + 2 x 300mm Chine Interceptors
Capacity to Add Extra Interceptors for More Control (Optional)
Stay in control with Zipwake Series S Control Panel
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of uncomfortable and dangerous boat pitch and roll.
Push the AUTO BUTTON – and GO!
The system provides continuous feedback of boat speed, pitch and roll angle, as well as the interceptors ́ positions, on a 2.4” sunlight-readable color display.
- Fully automatic - Dynamic pitch and roll control - Steering and turn enhancement
- Built-in GPS and motion sensors
- Unique and intuitive 3D controls
- Sunlight readable color display
- Instant state user feedback
- Auto power on/off via ignition key sense
- Full range of electrical interfaces
- NMEA 2000
- Waterproof
- Auto dimming / night mode
- Upgradable via USB stick
- Supports up to 3 additional Control Panels in the system
- Surface or flush mount
- Manages installation configurations from 1 up to 6 interceptors
Includes:
- 1 x Control Panel (incl. 7m Cable)
- 1 x Distribution Unit
- 2 x 300mm Chine Interceptor (incl. 3m Cable)
- Cable Covers
- MORE EFFICIENT LIFT -Near full beam interceptor arrangements are much more efficient at making lift compared to trim tabs with narrow span.
- LESS DRAG -Zipwake’s interceptor blade extends just 30 mm, whereas trim tabs often project 150 mm reflecting substantial drag.
- 5 TIMES FASTER ACTUATION -Zipwake’s blade stroke takes 1.5 seconds, outperforming conventional trim tabs by at least a factor of 5.
- LESS WAKE -Interceptors provide more effective trim control creating less waves which directly leads to better fuel economy.
Options:
- Straight Interceptors (Sold Each):
- 0582100 - IT300-S – 1 x 300mm Straight Interceptor + 3m cable (2011232)
- 0582105 - IT450-S – 1 x 450mm Straight Interceptor + 3m cable (2011233)
- 0582110 - IT600-S – 1 x 600mm Straight Interceptor + 3m cable (2011234)
- 0582115 - IT750-S – 1 x 750mm Straight Interceptor + 3m cable (2011235)
- Replacement Chine Interceptors
- 0582143 - IT300-S Chine – 1 x 300mm Port Chine Interceptor + 3m cable (2011702)
- 0582144 - IT300-S Chine – 1 x 300mm Starboard Chine Interceptor + 3m cable (2011703)
- 0582145 - IT450-S Chine – 1 x 450mm Port Chine Interceptor + 3m cable (2011704)
- 0582146 - IT450-S Chine – 1 x 450mm Starboard Chine Interceptor + 3m cable (2011705)
- Centre V-Shaped Interceptor:
- 0582120 - IT450-S V13 - Centre Interceptor (450mm Wide x 13º Deadrise) + 3m cable (2011482)
- 0582125 - IT450-S V16 - Centre Interceptor (450mm Wide x 16º Deadrise) + 3m cable (2011483)
- 0582130 - IT450-S V19 - Centre Interceptor (450mm Wide x 19º Deadrise) + 3m cable (2011484)
- 0582135 - IT450-S V22 - Centre Interceptor (450mm Wide x 22º Deadrise) + 3m cable (2011485)
- 0582010 – Integrator Module – For connection to Multi Function Display (MFD)
- 0582011 – Mini Controller – For second station control or limited dash room (3m cable)
- 0582150 - External GPS – The Zipwake’s standard Control Panel has a built-in internal GPS. When this is located inside the vessel and cannot receive a clear signal, it is recommended to install an external GPS receiver. The GPS signal provides accurate vessel position and speed; necessary input for the Zipwake’s automatic motion controller (2011240)
Downloads:
